-
-
CONTACT FOR SERVICES
-
CONTACT FOR SERVICES
-
CONTACT FOR SERVICES
-
CONTACT FOR SERVICES
-
Industrial Class Photoelectric Isolation Converter RS-232 TO RS-485/422 ATC-105 Isolation Interface Converter is compatible with RS-232C, RS-422, RS-485 standards and capable of converting single end RS-232 signal into RS-422 or RS-485 signal of balanced signal. The built in photoelectric isolator can offer 3500V isolation voltage and the rapid Transient Voltage Suppressor (TVS) can effectively inhibit lightning and ESD, prevent lightning strike and common code interference. Connect PC, IPC, or portable computer via a DB9 female connector at RS-232 interface, and connect RS-422, RS-485 end via convenient 4-bit terminal. The RS-485 supports dual-line half duplex. The inner circuit of ATC-105 Photoelectric Isolation Interface Converter can detect data direction and switch to control it automatically, conveniently to form a RS-485 network without any shake hand signal. This kind of RS-485 control is fully transparent and need no software amendment for the former working modes basing on RS-232. ATC-105 Photoelectric Isolation Interface Converter can provide credible connection for point to point, point to multi-point communication. The point to multi-point allows connecting 128 RS-422 or RS-485 interface devices with data transmission speed of 0-115.2KBPS. The 3 power supply and data flow indication light can indicate malfunction. It supports communication modes including RS-232C to RS-422, RS-232 to RS-485 conversion.Interface Feature : Compatible with EIA/TIA RS-232C, RS-485/RS-42 (2-Wire Half Duplex or 4-wire full Duplex Electrical Interface : RS-232C-DB9 Female Connector;RS-422/RS-485-4 bit Terminal Transmission Media : Twisted pair cable or shielded cable Operation Mode : Asynchronous half or full duplex Signal Indication : 3 light indication TR, RD, PWR Isolation : 3500VRMS 500VDC sequence Transmission Speed : 9600BPS to 115.2 KBPS Supply : External 9˜12VDC Transmission Distance : 0˜5 Kilometers (115200˜9600BPS) Working Environment : -25°C˜70°C, 5%˜95%RH Size : 125 mm × 54 mm × 25 mm Click here to View Product Manual -
The ATC-1000 is a RS232/RS485 to TCP/IP converter integrated with a robust system and network management features designed for industrial equipment to be accessed and controlled via Intranet or Internet. By integrating RTOS (Real Time Operating System) and complete TCP/IP protocol stack capability, ATC’s ATC-1000 provides not only a robust and high performance system to make your device connecting to Network, but also ease installation and Internet access. The ATC-1000 Web Configurator is a breeze to operate and totally independent of the operating system platform you useComputer Interface : 3 in 1 RS-232/RS-422/RS-485 interface Support : Windows 95/98/ME/NT/2000/XP/2003/WIN7/WIN8/WIN10 Transmission rate : 230KBPS serial interface and 10/100 MBPS Signal Indication : Link (Indicate Ethernet link),PWR (Power Indication) ACT(Sending / Receiving data serial to Ethernet), Supply : 9˜24VDC Working Env. : 0°C˜70°C, 10%˜95%RH Click here to View Product Manual -
Features
1,High-powered industrial cellular module 2,Housing: Metal, Providing IP30 protection. 3,wide power range from DC5V-35V. 4,RS232 port with 15KV ESD protection 5,SIM/UIM Port: 15KV ESD protection 6,power port: reverse-voltage and over voltage protection 7,Antenna port: lightning protection 8,Support standard RS232 port that can connect to a serial device directly 9,Provide dial-up software that can make it always online 10,Provide SMS tool software 11, Support standard AT command 12, Support SMS, dial-up and CSD function 13, Support APN/VPDN Specification of M2M Industrial GPRS MODEM Model No. CM3100 Cellular Parameters Item Content Cellular GPRS/GSM Standards and frequency bands Support EGSM900/GSM1800MHz dual-band,800/900/1800/1900MHz quad-band GPRS multi-slot class 10 Accord with the technical specification of SMG31bis Compliant to GSM phase 2/2+ Support data, short message and fax Coding scheme CS1~CS4 Bandwidth 85.6Kbps TX power GSM 850/900: <33dBm GSM 1800/1900: <30dBm RX sesitivity <-107dBm Interface Type: Item Content Serial port 1 RS232 serial port, 15KV ESD protection Data bit: 7 or 8 bit Stop bits: 1 or 2 bit Parity: no parity, odd parity, even parity,SPACE & MARK Serial speed: 110-230400bps Indicator POWER and on-line indicator Antenna Interface Standard SMA female interface, 50 ohm SIM/UIM Standard 3V/1.8V user card interface, 15KV ESD protection Power Interface Standard 3-pin power jack, reverse-voltage and over voltage protection Power supply： Item Content Supply voltage Wide voltage design, DC 5V to the DC32V power supply directly to the device; and built-in power supply over-voltage protection and reverse current protection Standard power supply DC9V/500mA Current while Communicating Average communication current : 90mA @ +9 VDC; standby current: 1.0A @9 V Physical features: Item Content Housing Metal housing: metal case, anti-radiation, anti-interference; shell and system security isolation, thunder protection design; meet the power requirements of safety regulations; protection rating IP30; particularly suit for harsh industrial control environments. Product dimensions 81*55*20 mm（not include the antenna and the fixed parts） Packing Size 298x226x60mm Weight 0.19kg Other parameters: Item Content Operating Temperature -25 ℃ ~+65℃ Extended operating temperature -35~+75ºC Storage Temperature -40~+85ºC Relative Humidity 95 %( No condensation ) Click here to View Product Manual -
Port Powered RS-232 Isolator
The ATC-131 optically isolates and protects the transmit and receive lines of your RS-232 port from ground loops and power surges up to 2500V RMS for one minute. The data stream is converted from an electrical pulse to an optical beam, then back to an electrical pulse. Because there is no electrical connection between the DTE and DCE sides of the isolator, the ATC-131, unlike a surge suppressor, will not pass large sustained power surges through to your equipment. This isolator will protect both the transmit and receive lines at baud rates up to 57.6K without the need of an external power supply. Power is derived through the transmit and handshake lines. Special circuitry allows the ATC-131 to be powered regardless of the state of the handshake lines. At least one handshake line must be connected on each side of the isolator. Note that handshake line signals are not passed through the isolator.Click here to View Product Manual- Protect serial port, inhibit static and surge, prevent ground loop and surge damaging devices
- Adopt latest high voltage photoelectric parts, powerful anti-jamming capacity
- Support RS-232 asynchronous communication standard, direct insert into RS-232 interface serially, convenient operation
- Compact size, optional manifold signals and suitable for various devices.
Interface Feature Conform to EIA RS - 232 and CCITT v. 24 asynchronous protocol Working Mode Asynchronous full duplex Transmission Speed 0-57.6kbps Electric Interface RS-232 DB9 male RS-232 DB9 female Isolation 2500V in succession or 7500V pulse Power Supply Power supply to the RS - 232 port (TXD, RTS or DTR) Product Appearance Plastic shell 63mmx33mmx17mm Working Environment -20℃ to 70℃, 5% to 95% relative humidity -
ARTIFICIAL INTELLIGENT INDUSTRIAL CONTROLLER- Applicable for accurate controls of Temperature, Pressure, Flow, Level and Humidity etc.
- Support Various Thermocouples, RTDs, Linear Voltages / Currents / Resistances fake rolex for sale and Radiation
- Modularization output supports SSR voltage, Linear Current / Voltage, Relay Contact, TRIAC non-contact switch,
- Single phase / three-phase Thyristor zero-cross triggering.
- Support multiple alarm function of high limit, low limit High Deviation and Low Deviation, Providing alarm blocking at the power start-up to avoid false- alarm.
- Typical baud rate AIBUS or MODBUS protocol, supporting RS485 OR RS232 communication port
Inputs : Universal all type of Thermocouple and RTD PT-100 Output : Single Relay or Dual Relay output OR SSR Voltage, 4-20mA Control Action : ON/OFF Alarm : High‚ Low‚ High deviation and Low deviation Communication : RS-485, RS 232 (Modularized Installable) Re Transmission O/P : Linear current or voltage(SV OR PV) Power Supply : SMPS 100~240VAC/DC‚ 50 Hz OR 24 V DC Panel Cutout Size : 96×96mm, 72×72mm, 48×48mm, 48×96mm, 96×48mm Click here to View Product Manual -
LX2V Series PLC
LX2V-1212-MR-A 12xDI/12xDO (1 BD Board) LX2V-1212-MT-A 12xDI/12xDO (1 BD Board) LX2V-1410-MR-A 14xDI/10xDO (1 BD Board) LX2V-1410-MT-A 14xDI/10xDO (1 BD Board) LX2V-1412-MR-A 14xDI/12xDO (1 BD Board) LX2V-1412-MT-A 14xDI/12xDO (1 BD Board) LX2V-1616-MR-A 16xDI/16xDO (2 BD Board) LX2V-1616-MT-A 16 xDI/16xDO (2 BD Board) LX2V-1814-MR-A 16xDI/14xDO (2 BD Board) LX2V-1814-MT-A 18 xDI 14xDO (2 BD Board) LX2V-2416-MR-A 24xDI/16xDO (2 BD Board) LX2V-2416-MT-A 24 xDI/16xDO (2 BD Board) LX2V-2424-MR-A 24 xDI/24xDO (2 BD Board) LX2V-2424-MT-A 24 xDI/24xDO (2 BD Board) LX2V-3624-MR-A 36 xDI/24xDO (2 BD Board) NOTE:- "No RTC, No Expansion Module, No High speed I/P Or O/P" CPU : STM32 CPU, Sensor Power Supply : DC-24V(400mA) Main Power Supply :AC100-240V/50-60Hz,DC 24V(Optional) Communication port : support RS422 & RS485, 2 serial port, Communication protocol : support FX2N NO PROTOCOL, programming software support FX2N Environment temperature : 0~55°CGeneral
Running Mode Scan round / Interrupt Programming Instruction List / Ladder Total Instructions Basic Instructions: 27 Applied Instruction: 136+2 (2 instructions different from Mitsubishi) Execute Time Basic Instructions: 0.06us /Applied Instruction: 1~10us Program Capacity 16K Download / Monitor Serial Programming Cable/ Mini USB High Pulse Output Transistor Type: 2 Channels / Relay Type: N/A High Speed Counter 6 Channels Timer Interrupt 3 Channels Latched Addresses Adjustable Storage FLASH Digital Filtering Yes, for all input terminal Serial Port COM1 RS422 or RS485 Serial Port COM2 RS485 Environment Tempeture Operating Temperature：0 ~ 55℃/Storage Temperature：-20 ~ 70℃ Operating Humidity 35~85%RH (No-condensate) Shock Resistance JIS C 0040 Standard Noise Immunity Noise Voltage： 1000Vp-p Pulse Width: 1us Frequency: 30-100Hz (Noise Simulator) Output
Output Type No Input Power Supply DC 24V Output Circuit COM Port Current No Insulation Mechanistic Leak current No Min. Load No Resistive 2A / point, 8A / COM port Inductive 80VA General 100W ON / OFF Response Time <10ms AC Power Supply
Voltage Range AC 100V~240V 50Hz~ 60Hz, DC 24V±10% Power Outage Time 10ms Inrush Current <15A 1ms / DC 24V, <15A 5ms (AC100V) <30A 5ms (AC 200V) Power Fuse 250V/1A (AC Power Supply), 250V/3.15A (DC Power Supply) Power Consumption <30W (DC Power Supply), <35W (AC Power Supply) Power Output DC 24V 850mA Click here to View Product Manual -
L1- Big Volume Relay output (normal open+ normal closed, capacity 250VAC/2A) L2- Small Volume Relay output (normal open+ normal closed, capacity 250VAC/1A) L4- Small Volume and long life Relay output Module ( capacity 250VAC/2A,With capacitor resistor absorber) L5- Dual Relay output(normal open,capacity 250VAC/2A) G- SSR Voltage output (DC 12V/30mA)Click here to View Product Manual
